The GoldFinder GF2 is a high performance multi-purpose professional metal detector. It utilizes the latest advances in electronic technology, and its functional design represents the leading edge of engineering.
The GF2 is easier to learn than other comparable metal detectors. Its combination of light weight and balance provides comfort unmatched by any other detector in its price range. Its most popular uses include coin shooting, relic hunting, and gold prospecting.
Operating Principle: VLF induction balance.
Operating Frequency: Nominal 13 Khz, quartz crystal timing reference.
Basic Sensitivity: 5x10 root Hertz(detectivity).
Lag Coefficient: 70 milliseconds.
Reactive Overload: Approximately 10,000 micro-cgs units(volume susceptibility).
Resistive Overload: Approximately 1,200 micro-cgs units(volume susceptibility).
Ground Cancellation Range: From ferrite to salt, inclusive.
Discrimination Ground Suppression: Combination of second and third order methods.
ID Ground Suppression:Third order.
Battery Life:Typically 40 hours with good quality alkalines, somewhat less with NiMH rechargeables.
Mechanical: S-rod with electronics housing mounted on handgrip
Search coil: 11" (28 cm) Open-frame elliptical double-D, waterproof.
Batteries: 4 AA's, Alkaline or NiMH (not included).
B-AXIAL Search coil - DETECT AT THE NEXT LEVEL
Part of the "Secret of Success" is the revolutionary NEW BIAXIAL™ search coil. Here is a totally new search coil that penetrates all soils deeper than ever before. You know what's under the coil BEFORE you dig!
Find even more on Junk Mail by browsing through the similar ads below.